人妻精品一区,肉动漫男人的天堂久久,亚洲 小说区 图片区 都市小说,口爆无码精品网站

全國服務咨詢熱線:

18668966307

當前位置:首頁  >  技術文章  >  HP-RFS300A The thermal paper standard static color tester

HP-RFS300A The thermal paper standard static color tester

更新時間:2024-09-23      點擊次數:564

Product Introduction:

The thermal paper standard static color tester is mainly used to quickly test the thermal reaction state of thermal materials under different conditions, in order to verify the thermal quality of thermal materials or to detect the optimal thermal parameters of thermal materials. It is an essential testing equipment for thermal sensitive material production units, users, and quality control departments. Meet GB/T28210-2011 thermal paper, QB/T2694 lottery paper.

 

Working principle:

 

The thermal reaction tester adopts the hot pressure detection method, placing the thermosensitive material between the upper and lower heating blocks, and then closing the upper and lower heating blocks to heat the thermosensitive material. The heating time, temperature of the heating block, and closing pressure of the heating block can be adjusted, allowing for rapid evaluation of different test samples. This instrument is controlled by a fixed program and has simple settings. It can be used to detect different thermosensitive materials, and can also be used to determine the ideal thermosensitive parameters for a specific thermosensitive material, providing users with accurate thermosensitive indicators.

Technical indicators:

1. Thermally sensitive temperature at room temperature+10 ° C to 250 ° C

2. Thermally sensitive pressure: 0.05-0.7MPa

3. Thermal sensitivity time: 0.1~999.9 seconds

4. Temperature gradient 20

5 heating surfaces 330mm x 10mm (customizable)

6. Gas source pressure 0.7MPa

7. External dimensions: 500mm x 330mm x 470mm (L x B x H)

 

8 power supply AC 220V ± 10% 50Hz

9 Net weight 30kg

Technical features:

The thermal reaction tester is based on the principle of thermal discoloration of thermosensitive materials, using heating blocks designed according to national and international standards. It is specialized in measuring the thermal discoloration status of various thermosensitive materials and the degree of discoloration under different working conditions, thereby guiding large-scale industrial production. This instrument mainly includes the following characteristics:

1. Number P I. D temperature control technology can not only quickly reach the set temperature, but also effectively avoid temperature fluctuations

2. Wide range temperature, pressure, and time control can meet various testing conditions of users

3. The manual and foot pedal test start modes, as well as the anti scald safety design, can effectively ensure the convenience and safety of user use

4. Precision mechanical design is adopted, and the aluminum can sealed heating block ensures the uniformity of heating on the heating surface. The cylinder controls the lifting of the heating block to evenly apply pressure on the thermosensitive material

5. The downward cylinder design not only ensures the stability of the instrument during operation, but also effectively avoids pressure fluctuations caused by heating

6. Both the upper and lower heating blocks can independently control the temperature, providing users with more combinations of experimental conditions

7. Bottom mounted dual cylinder synchronous circuit further ensures uniform pressure distribution on the heating surface

8. The extended heating block can meet the needs of heating large or multiple samples simultaneously, and supports customization of special heating styles.

9. Configure foot switches to ensure safe user operation

10. The pneumatic control components have high precision, and the entire set adopts internationally renowned brands

11. Anti scalding design and leakage protection design for safer operation

12. The heating element is carefully designed, with uniform heat dissipation and long service life

13. Specially optimized and designed operation panel based on principles of ergonomics for convenient operation

14. One temperature can be set for each experiment

Operation usage:

1. Connect the compressed air pipe to the compressed air inlet on the left side of the instrument;

2. Connect the foot switch to the left side connection of the instrument;

3. Connect the power cord socket to the power inlet on the left side of the instrument;

4. Prepare thermosensitive materials;

5. Inject compressed air and use the adjusting handle to adjust the pressure to a value that can bring the upper and lower heating blocks together, usually 0.18-0.30 Mpa;

6. Turn on the power switch on the left panel;

7. Turn the heating switch of upper heating block 12 and lower heating block 11 to ON;

8. Set the temperature controller to the desired temperature;

 

9. Take about 10-30 minutes to stabilize the set temperature;

10. Set the timer to the desired time,


全國統一服務電話

0531-85809007

電子郵箱:2289528882@qq.com

公司地址:山東濟南市槐蔭區新沙工業園三街17號

業務咨詢微信

久久久久久久大几把| 青草视频成人在线| 日韩av毛片免费无码| 久久人妻少妇一区二区| 国产无套乱子伦精彩| 国产成人AV三级在线无码| 欧美三码在线| 亚洲国产中文五月综合| 一区二区伦理| 黄色视频综合网| 黄色网址网站久久| 在线人成小说图片视频| 婷婷色婷婷开心五月四房播播久久| 亚洲三区在线日韩| 日韩av在线直播| 夜久久久久久久| 激情一区中文| 久久久无码精品亚洲日韩蜜臀浪潮 | AV在线精品二区亚洲| 少妇下蹲露大唇无遮挡0| 呦呦免费网站| 久久综合国产乱子伦精品免费| 无码人妻av一区二区三区蜜臀 | 在线波多野结衣绝顶高潮抖动 | 色婷婷久久综合中文久久一本| 日本在线综合网| www亚洲免费视频资讯| 国产亚洲伦在线无码| 日韩欧美一级一中文字幕| 99国产我和子的与子乱视频| AV先锋影音色欲| 欧美乱人伦视频中文字幕| 亚洲十次啦综合| 东京AV免费在线观看| 超碰99色| AAA免费视频| 偷拍 - 色哟哟| 99午夜福利视频| 丰满人妻精品一区二区| 成人动作av| 中文字幕日本人妻久久久|